Line and Limb Supreme Sculpture

Inspired by the mystery and symbolism of Seahenge, ‘Line and Limb’ is a striking sculptural piece from the Foras Sculpture Collection. Drawing from the ancient Bronze Age monument discovered beneath the sands of the Norfolk coastline, the sculpture explores humanity’s connection to landscape and movement.

The life-size sculpture captures a suspended moment between stillness and motion. Balanced gracefully on one leg while extending outward in every direction, the figure evokes the energy of a dancer mid-movement. The pose feels both grounded and weightless, as though the figure has just landed or is preparing to rise. This sense of tension and movement gives the piece a living presence from every angle.

Handcrafted in Foras’ exclusive Supreme Resin, ‘Line and Limb’ is available in a richly textured finish that reveals the marks and character of the hand-moulding process, creating an organic and expressive sculptural aesthetic. A natural stone edition will also be coming soon.

Each sculpture has an option for mounting with a stainless-steel plinth or a stone granite boulder, allowing the piece to be securely stabilised and to ensure complete stability and no movement in all weather conditions.

Rooted in Norfolk’s ancient heritage while embracing contemporary sculptural form, ‘Line and Limb’ stands as a celebration of balance, transformation, and the enduring dialogue between humanity and nature.

Technical Specifications

• Material: Foras exclusive Supreme Resin – textured finish
• Future Edition: Natural stone version coming soon
• Installation: choose from stainless-steel fixing plinth or stone boulder for secure installation

This will be a personalised delivery depending on your location. Before purchasing please contact us at [email protected] to check your address for delivery requirements.

Choose from two options for your mounting stand:

Option 1 – The steel stand: The stand itself is designed to either be mounted straight into the earth or concreted:

Earth Mounting: 

1. Dig a hole to accommodate the two ‘prongs on the stand.
2. Flatten the ground in a 60cm square around the hole.
3. Fit the stand, prong side down in the hole, on the area of prepared ground.
4. Use the ground spikes to secure the stand in the earth.

This method allows both the stand and the sculpture to be moved and repositioned with ease. 

Concrete Mounting:

1. Dig a hole  30cm in diameter to accommodate the two ‘prongs on the stand’ and allow for a good amount of concrete.
2. Blank off the ends of the ‘prongs’ with something like duct tape.
3. Fill the hole with wet concrete (must be pourable consistency).
4. Push the stand, prong side down, into the concrete.
5. Allow to dry for 24hrs before fitting the sculpture.

This method is more permanent, however still allows for the sculpture itself to be removed for storage if needed.

Please click here for full dimensions and a drawing of the sculpture Stand.

Option 2 – The Stone Boulder: Each one Specifically drilled to each sculpture to ensure the pins fit.